Tile glue fastener

Pin
Send
Share
Send

In this review, the author shows how to make a simple device for quickly applying glue to tiles.

This homemade product is a trough for glue and, in fact, the device itself in the form of a comb for applying the same layer of glue. It is mounted on top.

First of all, the author cuts four corners at an angle of 45 degrees.

Then they will need to be welded together. The result is a square frame. We clean welds with a grinder.

The main stages of work

The next step is to cut off a piece of sheet metal strip. Using a comb as a template, do the markup. Therefore, we cut out the teeth.

To the square frame, the author welds the fasteners to install the wheels. And then we attach the frame itself to the trough for tile adhesive.

From the bars and waterproof plywood, the author makes a platform on which the tile will move. The device itself with a comb is installed on it.

After that, we install the platform with the device on the trough. By the way, one of the wheels should be with a brake.

For details on how to make a device for quickly applying glue to the tiles with your own hands, see this video.

Pin
Send
Share
Send

Watch the video: GLUE and SCREW BACKER BOARD ? (March 2024).