Garden bench from a profile pipe and a pair of shock absorbers

Pin
Send
Share
Send

In this review, the author decided to move away from the usual patterns and make a garden bench without hind legs, but with shock absorbers.

The main material for the manufacture of the frame is a profile pipe. The author decided to make the seat and backrest out of aluminum blinds.

First of all, it will be necessary to make the frame of the back of the country (or garden) bench.

To do this, the author cuts four pieces of the profile pipe to size, and welds them together. The result should be a rectangular frame.

After that, you need to weld two more rectangular frames from the profile, but smaller.

As you might have guessed, this will be the base and seat of the bench (they should be the same size).

The main stages of work

At the next stage, the author cuts off two front legs from a profile pipe. They need to be welded to the base, and they are bolted to the seat frame.

This is necessary so that the bench seat has the ability to cushion.

Further, the author welds the backrest frame to the seat frame, exposing it at the desired angle.

After that, it will be necessary to weld mounts for shock absorbers to the seat frame and the base of the bench.

At the last stage, we weld the base plates and then proceed to the installation of aluminum blinds, which will serve as the seat and backrest.

For details on how to make a bench from a profile pipe and shock absorbers with your own hands, see the video.

Pin
Send
Share
Send

Watch the video: How to Fit Gas Strut To Just About Anything (March 2024).