Sometimes in a summer cottage it is required to transplant a bush or small tree from one place to another. How can I do that?
Most often they use the classical method - that is, they simply dig in the desired “object” from all sides with a shovel. However, there is another way, less time-consuming.
In this review, the author proposes to make a simple but useful device for giving. With it, you can transplant a bush or tree, and just make a hole in the ground.
This will require a profile pipe, a round pipe, sheet metal and fittings. The first step is to cut three small pieces of a square profile pipe 20x20 mm. Then, from these blanks, the author welds a U-shaped part.
Progress
At the next stage, it will be necessary to cut another piece of the profile pipe, but of a larger size (25x25 mm), and cut it in half. The resulting blanks are put on a U-shaped part.
Further, the author cuts a piece of reinforcement (you can also use a regular round bar or a square). It needs to be welded to two workpieces from a profile of 25x25 mm.
After that, cut a piece of sheet metal that is suitable in size, and give it a cylindrical shape (no need to connect the edges). We weld this blank to a U-shaped part.
From a piece of sheet metal we cut out a plate to which two pieces of reinforcement should be welded. And the author welds this detail to the reinforcement connecting the two blanks from the professional pipe.
Also, a bracket made of reinforcement must be welded to it. And at the last stage, it remains only to weld a handle from a round pipe.
For details on how to make a useful fixture with your own hands for a summer residence, see this video.
