Device for removing dust when working with a rotary hammer

Pin
Send
Share
Send

Drilling holes in a concrete wall or ceiling with a puncher creates a lot of dust. And in this review, we bring to your attention a cool idea of ​​how you can effectively deal with this problem in the process of work.

To make a home-made device, you only need a part of the plastic bucket (for example, from under the paint), as well as a plug and a branch for the sewer pipe.

The first step is to use the grinder (angle grinder) to cut off the bottom of the bucket along with the bottom.

Homemade manufacturing process

At the next stage, in the cut blank, you need to cut two holes located close to each other - for the diameter of the plug and elbow for the sewer pipe 50 mm.

The edges of the holes will need to be treated with sandpaper. In the stub itself, the author also cuts a hole and makes a slot grinder.

Then the master attaches the plug to the silicone sealant, and additionally bolts it onto the self-tapping screws. Then, a seal is put on the contour of the cap and plug.

A bend for a sewer plastic pipe is inserted into the second hole, to which a pipe with a hose from a vacuum cleaner is connected. The homemade product is ready, and you can try it in work.

For details on how to make an appliance with your own hands to remove dust during work with a punch (when drilling holes), see the video on the site.

Pin
Send
Share
Send

Watch the video: HOW TO use Hilti TE DRS-6-A dust removal system and DCD dust collector (December 2024).