The electric chisel is quite an expensive pleasure for a home workshop. And the kit itself is also not cheap. However, it is possible to make an electric chisel with a drive from a drill or a screwdriver.
Such a homemade tool is especially useful for those craftsmen whose work is directly related to the processing of wood blanks. In constructive terms, this homemade product is not very difficult, so it will not be difficult to bring it to life.
And first of all, it is necessary to cut the workpieces of the right size, and then mark and drill holes in them. After that, you need to screw a couple of square rods to the larger plate.
And on the reverse side, these rods are connected to each other by two smaller metal plates. All elements are mounted on screws. In the plates, it will be necessary to additionally make sweats under the caps of the screws.
The main stages of work
At the next stage of work, the master makes one of the main parts of homemade work - an eccentric assembly. To do this, he uses a segment of the stud, two elongated nuts, a regular nut, and three bearings.
Next, from a piece of board or plywood and wooden blocks, it is necessary to make a base on which the eccentric and the part from metal plates and square rods will be mounted.
Then it remains only to make the mount (wooden clamp) for the drill, and install the electric drill itself. Details on how to make an electric chisel with a drive from a drill or a screwdriver can be found in the video on the website.
