Making a powerful rocket stove with three fuel chambers and a surface for frying meat or other products with your own hands is not difficult at all. This will require profile pipes and sheet metal.
Please note that this design is not intended for home heating, but specifically for cooking in the fresh air.
First of all, it is necessary to cut blanks from sheet metal for making a frying surface. In total, five blanks should be obtained: the plate itself and four side walls.
Then all prepared billets are welded together. Also from the profile pipe it will be necessary to weld a “corner” for installing a chimney pipe. A round steel pipe is welded inside the profile.
The main stages of work
At the next stage, the master cuts the workpieces from profile pipes, which then need to be welded together. The result is a three-section fuel chamber for a rocket furnace.
Then from the profile pipe 20 * 20 mm it is necessary to make a rack on which the frying surface will rest. All structural elements of the rocket furnace are welded together. Doors are welded to the fuel chambers.
At the last stage of the work, it remains only to clean the welds and paint the surface of the furnace with heat-resistant paint. For details on how to make a rocket furnace with three fuel chambers and a frying surface, see the video on the site.
