When in a house or apartment you have to move furniture from place to place alone, it is difficult to do without improvised means. For example, using a homemade tilter, you can easily move a sofa, armchair, bedside table or chest of drawers without fear of damaging the flooring and tearing your back.
To make this device, you will need a piece of a square profile pipe, a steel tube, a piece of corner, two furniture wheels, as well as a homemade sleeve made of pipe, and a piece of steel bar. In the design of the tilter, a rotary mechanism is provided, so that you can move furniture in the right direction.
How to make a tilter for furniture
At the end of a piece of steel round timber, a shallow groove should be made around the entire circumference of the workpiece, and a short section of a smaller diameter bar should be welded to the opposite side. Then we connect the resulting part with a corner - it needs to be welded from the outside of the shelf approximately in the middle.
At the end of the round pipe we fasten the sleeve, which will be worn on the protruding part of the steel bar. On the edges of the square profile welded furniture wheels. Then the profile pipe must be welded to the handle at a distance of 10-15 cm from the edge of the sleeve. After that, we put the handle on the movable part of the structure, fixing the "finger" from the round timber with the circlip.
Grind the surface of the tilter with a grinder and cover it with paint. Well, then you can safely proceed to rearrange the furniture without any help. Using this device, you will save time and effort. The process of manufacturing a tilter for furniture, see the video on our website.
