With this home-made device, you can quickly and easily dismantle motorcycle shock absorbers.
For the manufacture of this fixture, pieces of a steel plate, an asterisk, two round rods and bushings from a steel pipe will be required.
First of all, the author cleans the star from rust using a grinder with a petal circle. If the star is new, then this step can be skipped.
The main stages of work
At the next stage, the author cuts a piece of steel strip and makes a selection at the edges so that a pair of bushings from a round pipe can be welded.
The author welds two metal round bars to the sprocket, having previously cut them to the desired length. Welds must be cleaned using angle grinders.
The author puts on a plate with two bushings at the edges of the rods, which act as racks. Then it is necessary to weld another plate to the free ends of the rods.
Actually, on this the manufacturing process of the device can be considered completed. Now for work you need a car hydraulic jack.
Details on how to make a homemade device for disassembling motorcycle shock absorbers with your own hands can be found in the video on the website.
