At the summer cottage, a tool is always useful, with which you can make shallow pits and holes in the ground. For example, for planting cuttings of trees or flowers.
In this review, the author demonstrates how to make a mini garden electric drill with your own hands with your own hands. Some items will require a lathe to make.
The first thing you will need to do is a Yamobur screw - for this you will need a steel round log and round plates from which the cutting elements of the screw will be made.
Screw manufacturing process
The end of the steel round timber must be grinded onto a cone on a lathe. Then, using a crown, the author cuts six discs from a piece of metal plate. In the center you need to drill holes.
The next step is to make a cut on each band saw on a band saw. Or you can use angle grinder (grinder).
After that, the edges of the disks will need to be unbent in different directions. To do this, the author uses a special home-made device, but you can also do with ordinary pliers with a vise.
As a result, we got the elements of the auger auger, which must be connected together. Next, we weld them to the rod.
The main stages of work
At the next stage, the author cuts a workpiece from a round steel pipe. It is necessary to weld a metal plate on top of it. We clean the welds with a grinder.
Then you will need to weld the sleeve to the spring, and you can start painting and assembling the device. The drive is a screwdriver.
For details on how to make a mini garden electric drill with your own hands, see this video.
