Need to place a large number of clothes, but in the closet there is no more space? Then you can make a floor rack-hanger. It is convenient and functional, and at the same time harmoniously fits into any interior. Also, if necessary, such a rack is easy to move to the right place.
For its manufacture, a profile pipe, a piece of board and small bushings that can be cut from a brass or copper pipe will be required.
First of all, it will be necessary to saw off a piece of board in size (you can use oak, maple, acacia and even conifers). After that, you need to make markings and drill holes along the entire length of the board.
The main stages of work
At the next stage, it is necessary to cut bushings from a brass or copper tube of a suitable diameter. The ends of the blanks must be processed on a grinder or using a angle grinder with a petal circle.
In principle, aluminum and even steel bushings can also be used, but they look less attractive. At the same time, steel bushings are subject to corrosion, so they will need to be painted.
Further, the author presses prepared and machined bushings into the holes in the board. This will require a small block and a hammer.
Then it remains only to make the rack itself from the profile, and paint it. A hanger is attached at the top. For greater reliability from the ends, it is mounted on self-tapping screws.
For more information on how to make a floor-mounted rack-hanger from a profile with your own hands, see this video.
